Alles rund um Musikboxen: Forum Jukebox-World  
Forum Jukebox
Jukebox-World Jukeboxen Jukeboxes Jukeboxparts Jukebox parts Forum
Jukebox-World

Stamann Musikboxen Wurlitzer seeburg Rock-Ola AMI Rowe Bergmann Wiegandt NSM Tonomat Eltec Beromat

Archiv Anzeigenmarkt Ersatzteile Seriennummern Kontakt Über uns Shows Links AGB Gästebuch

Eltec f60
geschrieben von: 24AB2 (IP gespeichert)
Datum - date: 14. March 2017 20:30

Bought last summer an Eltec F60 ( took me years to find one )
Bought a month ago another one ( what are the odds ? )

Fabrik nr first one 1932 , Fabrik nr. second one 1581.

Altough a hundreds apart there is quite some difference.
The earlier nr. has a different interiour decoration , different title boards and holder , has no Eltec F60 emblem , the glass can only be removed from the inside , different coin registration mechanism and most importantly : has a different record drive system.

The record drive mechanism uses a drive belt and is constructed in different way : see pictures
One drive belt is missing , dimensions :
Length : 185 mm
thickness : 1mm
width : 5mm
diameter : 60 mm

question : is something like this available ? , and if not : solutions ?
is there an rubber ( inner tyre ) tube with a diameter of 60 mm which I can cut in 5mm ?

For the first Eltec I still need a picture of the F60 emblem part , anyone ?

Aaldert Bruinenberg

WWW.24AB2.NL



1 mal bearbeitet. Zuletzt am 14.03.17 20:43.

Anhänge: Record drive 1.jpg (95kB)   Record drive 2.jpg (95kB)   Eltec emblem.jpg (111kB)  
Re: Eltec f60
geschrieben von: Hildegard (IP gespeichert)
Datum - date: 15. March 2017 09:38

Hello Mr. Bruinenberg,

Interesting to see that Eltec used two different drive systems. If you like you're welcome to send some photos showing the differences, so we can add to the archive.

About the belt: If the length is 185 mm, the diameter should be slightly less than 60 mm - 58.8 mm.
The NSM drive belt comes very close - 57 mm in diameter.


Kind regards - Hildegard Stamann



1 mal bearbeitet. Zuletzt am 15.03.17 09:39.

Re: Eltec f60
geschrieben von: 24AB2 (IP gespeichert)
Datum - date: 16. March 2017 17:01

Thx for the info , the NSM drive will surely do ( have about 3mm motor adjusting space )
But what about the width ? 5mm ?

Will make a few high resolution pictures of the 2 drive systems

included picture shows the different interiour decoration

edit : made an A3 scan so I reproduce it



1 mal bearbeitet. Zuletzt am 16.03.17 17:15.

Anhänge: Interiour-819x614.jpg (118kB)  
Re: Eltec f60
geschrieben von: 24AB2 (IP gespeichert)
Datum - date: 16. March 2017 17:02

Different coin / slug

Anhänge: Coin 1581-614x819.jpg (125kB)   Coin 1932-614x819.jpg (112kB)  
Re: Eltec f60
geschrieben von: 24AB2 (IP gespeichert)
Datum - date: 16. March 2017 17:05

Restored amp and Isophon FW32 speaker

Anhänge: Amp 1932-819x614.jpg (123kB)   ISOPHON FW32-768x1024.jpg (139kB)  
Re: Eltec f60
geschrieben von: 24AB2 (IP gespeichert)
Datum - date: 16. March 2017 17:09

Different titleboards and holders
the 1932 misses all 3
the 1581 misses 1
not interchangeable but atleast it give me an idea how to make them

Anhänge: Titleboards 1581-819x614.jpg (82kB)  
Re: Eltec f60
geschrieben von: Hildegard (IP gespeichert)
Datum - date: 16. March 2017 19:12

Hello Mr. Bruinenberg,

the NSM drive belt has a width of little less than 6 mm. Thickness is about 1.1 mm.

Very interesting to see differences in those two models. They are big enough for the archive - scroll down here:
'[www.jukebox-world.de]'


Hildegard Stamann

Re: Eltec f60
geschrieben von: 24AB2 (IP gespeichert)
Datum - date: 19. March 2017 14:46

Pictures of the 2 different systems.
Picture of both mechanisms : only difference is de form of the pins
( the earlier one also doesnt have a capacitor in the DC line )

Anhänge: rd1-691x518.JPG (145kB)   rd2-691x518.JPG (137kB)   Mech1-675x506.jpg (150kB)  
Re: Eltec f60
geschrieben von: 24AB2 (IP gespeichert)
Datum - date: 19. March 2017 22:43

Actuators is a better word ( instead of pins )
Improved picture .

Anhänge: Different form of the actuators.jpg (148kB)  
Re: Eltec f60
geschrieben von: Hildegard (IP gespeichert)
Datum - date: 19. March 2017 22:50

Thank you.

I added those photos too.

Kind regards - Hildegard Stamann



In diesem Forum dürfen nur registrierte Benutzer schreiben.
Zum Einloggen oder Registrieren folgen Sie LogIn - Registration.

Sorry, only registered user may post in this forum.
To login or getting registered please follow LogIn - Registration.
Impressum

This forum is powered by Phorum.